The icon image creation is actually fairly expensive because the first
time you create a 32-bit image init_blend() is called, which is fairly
slow. Since only sub__icon makes use of these images (non-Windows
platforms and $Console:Only programs can't even use them) it's easy
enough to move the creation into sub__icon so the creation cost is
avoided on startup.
Fairly simple, the finished entry is free'd and then removed from the
list, but that order results in us accessing the entry's next member
after it has been free'd. Swapping the order of the operations fixes the
issue.
Fixes: #281
The commands _ScreenX and _ScreenY got significantly slower due to the
need to wait for the GLUT thread to wake up and execute the glutGet()
command for them. We've already seen a few programs (including the IDE)
where this behavior completely grinds the program to a halt, so we
definitely can't keep it.
The simple solution here is to not call glutGet() on every _ScreenX/Y
command. Instead every time the idle/timer function runs we get the
current values for the relevant glutGet() variables and store them.
libqb_glut_get() then checks if the value being read is one of the ones
we read in the idle/timer functionand if so just returns the last read
value. By doing it this way the commands no longer has to wait on the
GLUT thread for the result.
Fairly straightfowrad, programs were randomly seg faulting on exit. This
was happening due to GLUT registering a cleanup function via atexit(),
which then gets called when exit() is called.
The issue happens when exit() is called on a thread other than the GLUT
thread, which leads to the exit() call then attempting to cleanup GLUT
while the other thread is still using it, which randomly leads to seg
faults.
Fixing this is slightly annoying. We cannot stop the GLUT thread, as
the basic GLUT API (which is used on Mac OS) simply does not offer a way
to exit the glutMainLoop() call. Thus the simplest solution is to simply
make sure we call exit() on the GLUT thread, which we can fairly easily
due via the message queue.
That being the case, a new libqb_exit() API was added, which simply
regsiters the GLUT exit message and then waits for the program to end.
The atexit() handler then runs on the GLUT thread and everything works
out fine.
In the future we probably should redo the exit logic a bit so that all
the threads are actually stopped/joined to ensure the exit process is
consistent, however this is good enough for now. Also, there's plenty of
error states which call exit() which I did not address.
With the recent changes to libqb.cpp to pull out some of the GLUT logic,
the only actual Objective-C in libqb.cpp was pulled out. That being the
case, it's no longer necessary to have libqb.mm for compiling libqb.cpp,
so we're removing it to simplify the compliation logic a bit.
This fixes all the code so that all the calls to glut functions
happen on the same thread that is running GLUT.
We achieve this by creating a queue of GLUT commands to execute.
Commands can be added to the queue anywhere in the code, and then the
queue is processed on the GLUT thread via it's idle func or timer func.
The command is run and if necessary the result is provided in the
message queue object. Each object contains a completion which can be
waited on to block until the GLUT thread has processed the command.
Fixes: #66
The current GLUT initialization logic is flawed because it allows the
QB64 code portion of the program to start on a separate thread at the
same time that the GLUT code is starting. This results in a race where
some commands won't work for a brief period at the beginning of the
program (with "won't work" being very inconsistent, some return invalid
values, some have a chance at seg faulting).
The same issue also leads to us adding many `while (!window_exists)`
checks in an attempt to solve this race for some of the commands.
Unfortunately this solution is very inconsistently applied leading to
some deadlock situations, and really it's a silly solution when this
race is entirely our creation anyway.
To fix this, the logic was changed such that we perform all of the GLUT
initialization besides calling `glutMainLoop()` before we ever start the
thread that runs the actual QB64 code. By doing it this way we ensure
that the GLUT initialization has already taken place before the code
runs and thus the race is gone.
Things get a bit more interesting with $SCREENHIDE, because that simply
delays the execution of the GLUT initialization indefinitely until
_ScreenShow is done. This was previously very buggy since some commands
rely on FreeGLUT being up and will simply hang the entire program if
run. Other commands have logic to catch this and simply return zero.
The above issue is solved with the `NEEDS_GLUT()` and `OPTIONAL_GLUT()`
macros. Both of them simply check if the GLUT initialization has taken
place and exit the current function if it has not. The difference
between the two is that `NEEDS_GLUT()` throws an 'illegal function call'
error while `OPTIONAL_GLUT()` simply exits with no error. The choice of
behavior of each function was based upon its previous behavior - if it
checked `screen_hide` and exited with no error previously, then
`OPTIONAL_GLUT()` was used. If it deadlocked or similar then
`NEEDS_GLUT()` was used (so instead of deadlocking, it now produces an
error). In this way, programs can now never get stuck due to the use of
`$SCREENHIDE` and all the commands have consistent behavior that can be
relied upon.
Fixes: #234
Fonts 9, 15, and 17 can *only* be used in SCREEN 0. Attempting to use them in graphic screens results in a seg fault and an instant program crash on Windows. This is definitely the most undesirable of behaviors for a program, and can easily be caught and dealt with just by tossing a simple "Illegal Function Call" error for the issue.
Registering a warning function keeps FreeGLUT from writing warnings to
the console (which is not desirable since it conflicts with our own
console output).
Modifies libqb.cpp to add support for opening HTTP connections via
_OPENCLIENT(). This makes use of the libqb_http API in ./libqb, which is
backed by libcurl.
This also includes a bit of refactoring for some of the code that
required additions. I replaced a few of the integer values with enums,
and added a new entry for Http and then implemented it in all the
necessary locations. In addition to `_OPENCLIENT()`, there is also
support for using HTTP connections with `EOF()`, `LOF()`, `GET #`
(variable and fixed length), and `CLOSE`.
I additionally fixed an issue of parsing the colon parts of the
`_OPENCLIENT()` parameter, where having too many colons would cause the
program to crash. Since we only allow so many parts to begin with it I
simply limited the max number of parts it will split to 10.
Fixes: #98
Fixes: #46
This adds the libqb_http API, which is designed to support HTTP and
HTTPS usage from QB64-PE source.
The design consists of a single thread which services all the HTTP(s)
connections. There are then various libqb_http APIs exposed that allow
interacting with this thread to create a new connection, query
connection status, read data, or close the connection.
Internally the thread makes use of the curl_multi interface to allow a
single thread to service multiple HTTP(s) connections in parallel. This
means you can _OPENCLIENT() multiple HTTP connection in a row and all of
them will be serviced at the same time in whatever order data is
available.
HTTP is optional and selected via a Makefile setting. A stub is swapped
in if HTTP support is not used, which avoids need to add another build
flag to libqb.cpp.
We were incorrectly treating the empty string and NULL the same and
using a password dialog for both. It now has the correct behavior of
displaying the password when provided the empty string, but just
displaying a blank input box when provided NULL.